800-811-4403
sales@petsinc.net
sales@petsinc.net
Thermoplastic-Analysis.com
Plastic Engineering And Technical Services, Inc.
........... Flash Movie & Text Will Be Replaced
MoldFlow
Mold Filling and Computer-Aided Engineering Services
Analysis Simulation Requirements
| Filling | Packing | Cooling | Warpage | |
|---|---|---|---|---|
| Material | also co-injection, sequential fill and gas analysis | |||
| Manufacturer | Required | Required | Required | Required |
| Grade | Required | Required | Required | Required |
| Shear Rate/Viscosity Data | Required | Required | Required | Required |
| Shrinkage Data | Required | |||
| Part Geometry | ||||
| Surface File (IGS Preferred) 4 | Required | Required | Required | Required |
| Sample Part | if recommended | if recommended | if recommended | |
| Gate Locations | if recommended | if recommended | ||
| Special Requirements | Required | Required | Required | Required |
| Mold Geometry | ||||
| Cavity Layout | Required | if recommended | Required | |
| Nozzle Height | Required | |||
| Mold Material | Required | Required | ||
| Mold Drawings/3D Water Lines | Required | |||
| Processing | ||||
| Injection Time, Mold & Melt Temps, Packing Profile | if recommended | if recommended | if recommended | if recommended |
| Maximum Injection Rate | if recommended | if recommended | if recommended | |
| Machine Capacity (ton) | Required | |||
| Cooling Capacity (GPM) | Required | |||
| Coolant Type | if recommended | |||
| Recommended Packing Profile | if recommended |
1 - Filling analysis is a pre-requisite for packing, cooling and warpage analysis
2 - Packing analysis is more accurate when combined with cooling
3 - Filling, packing and cooling analysis are pre-requisites for warpage analysis
4 - IGS (International Graphics Exchange Specification) is a translator of CAD geometry. Parasolid, UGII, Pro-E and Catia are also acceptable.
2 - Packing analysis is more accurate when combined with cooling
3 - Filling, packing and cooling analysis are pre-requisites for warpage analysis
4 - IGS (International Graphics Exchange Specification) is a translator of CAD geometry. Parasolid, UGII, Pro-E and Catia are also acceptable.
Legend Icons = Required
Legend Icons = if Recommended
Legend Icons = if Recommended
© 2012 Plastic Engineering & Technical Services, Inc. all rights reserved
site designed & hosted by Real Smart Marketing LLC
site designed & hosted by Real Smart Marketing LLC